UV DTF Adhesive Transfers

Introducing our UV DTF adhesive cup wrap for a 16oz Glass Can Tumbler size. (Glass Cup NOT included but can be purchased from us as well) 

Ready to press and apply without use of a heat press or weeding or layering.
Just simply apply, smooth out, and peel film.

The wraps can be applied to glass cups, tumblers, pens, phone covers, wood or any smooth surface.

Approximate size of 23cm X 10cm

How to apply
1. Clean your Glass
2. Squeegee front and back of transfer with a credit card or craft squeegee.
3. Peel the backing off your design transfer.
4. Place design onto your glass, making sure it is positioned correctly as once it placed it cannot be removed.
5. Press design onto glass, work from the centre outwards going slowly as you wrap the glass, you can use a credit card or squeegee to help guide you making sure you press firmly.
6. Firmly press each part of the transfer with your fingers, the more pressing you do the better.
7. VERY SLOWLY peel the top film from the glass pulling it as close to the glass as possible. If part of the transfer lifts place it back down on the glass rub again and lift.

NOTE: Items with the UV DTF Transfers must be Hand washed only. Do not put inside the microwave. Do not soak and not dishwasher friendly.

If you have any questions or request, please don’t hesitate to send an email or message on my Instagram and Facebook page - Ceehjaycreations.

Thank you so much